Uncovering bargains from Australia’s favourite retailers!
Uncovering bargains from Australia’s favourite retailers!
found at DigiDirect
This Haida 150 Wide-Angle Filter Holder Kit is designed to allow for the convenient use of 150mm wide, 2mm thick filters with a Nikon PC NIKKOR 19mm f/4E ED lens without vignetting.
The kit consists of two main components, a front filter holder, and a bayonet, filter holder adapter ring. Use of the filter holder is easily accomplished by first locking the filter holder adapter ring onto the front of a Nikon PC NIKKOR 19mm f/4E ED lens.
Adapter rings are separately available for lenses with 67mm, 72mm, 77mm, 82mm, 95mm or 105mm front filter threads. After being fitted onto an adapter ring, the filter holder's screw-on locking pin helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. This Haida 150 Wide-Angle Filter Holder Kit is pre-installed with one pair of filter slots, a configuration that accommodates one rectangular filter. Also included is a second pair of filter slots, and a second set of screws designed to attach both pairs, which allows up to two rectangular filters to be used at the same time.
To prevent stray light, which could have unwanted effects on exposure, from coming in between an installed filter and a connected lens, two gaskets are positioned along the front of the filter holder. These gaskets are designed to form a seal between the pairs of plastic filter slots.
