Fangpusun 60A Mppt Regulator Charge Controller For Outback Offgrid Solar Panel Power

found at MyDeal

60A Mppt Regulator Charge Controller For Outback Offgrid Solar Panel Power Save $249

Fangpusun
60A Mppt Regulator Charge Controller For Outback Offgrid Solar Panel Power

Now
$699
Was $948
Save $249
26% off.
Go to Store
MyDeal

Product Description

Product features Increases PV Array Output by up to 30% Advanced Continuous Maximum Power Point Tracking Full Power Output in Ambient Temperatures up to 104°F (40°C) Battery Voltages from 12 VDC to 60 VDC Programmable Auxiliary Control Output Built-in 128 days of Data Logging Fully Network Integrated and Programmable 5 Years Warranty Displays Text LCD display for operating parameters,fault messages,self test Options Menu-driven operation Programming by buttons Certificates Compliant with European Standards(CE) RoHS compliant Nominal Battery Voltages 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up) Maximum Output Current 60 amps @ 104° F (40°C) with adjustable current limit Maximum Solar Array STC Nameplate 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts NEC Recommended Solar Array STC Nameplate 12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts PV Open Circuit Voltage (VOC) 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum Standby Power Consumption Less than 1 Watt typical Power Conversion Efficiency 98.1% @ 60Amps in at 48 VDC System voltage - Typical Charging Regulation Five Stages: Bulk, Absorption, Float, Silent and Equalization Voltage Regulation Set points 10 to 80 VDC user adjustable with password protection Equalization Charging Programmable Voltage Setpoint and Duration - Automatic Termination when completed Battery Temperature Compensation Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell Voltage Step-Down Capability Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input Programmable Auxilary Control Output 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC) Status Display 3.1 (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total Remote Display and Controller Optional Mate or Mate2 with RS232 Serial Communications Port Network Cabeling Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires) Data Logging Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production Hydro Turbine Applications Consult factory for approved Turbines Positive Ground Applications Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications) Operating Temperature Range Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C) Environmental Rating Indoor Type 1 Conduit Knockouts One 1 (35mm)on the back; One 1 (35mm) on the left side; Two 1 (35mm)on the bottom Weight - Unit 11.65 lbs (5.3 kg) Shipping 13.64 lbs (6.0 kg) Dimensions - Unit 13.5 x 5.75 x 4 (40 x 14 x 10 cm) Shipping 18 x 11 x 8 (46 x 30 x 20 cm) Options Remote Temperature Sensor (RTS), HUB 4, HUB 10, MATE, MATE 2 Menu Languages English & Spanish

More information

Also available to Buy Now, Pay Later with...

You may also like...

More Electronics Deals